PE plug-in type tube cap:

It is a terminal blocking piece for polyethylene (PE) piping systems, mainly used to close the ends of the pipe to prevent water flow or gas leakage. It is widely used in building water supply systems, municipal engineering, agricultural irrigation systems and other fields.

1. Product Features

1. Material performance

• Strong corrosion resistance: PE materials have good chemical stability, can resist the corrosion of a variety of chemical substances, and are suitable for a variety of corrosive environments.

• High strength: It has high mechanical strength and can withstand certain pressure and impact.

• Long service life: Under normal use conditions, the service life of PE plug-in tube caps can reach decades.

• Environmentally friendly and non-toxic: PE materials themselves are non-toxic and meet drinking water sanitation standards and will not pollute the water quality.

2. Design Features

• Plug-type design: Through plug-type connection, it is easy to install and firmly connected.

• Good sealing performance: After the pipe cap is connected to the pipe, it can effectively prevent water flow or gas leakage.

• Multiple specifications: Available in a variety of sizes and specifications to meet the sealing needs of different piping systems.

3. Connection method

• Plug-type connection: Through the plug-type connection, it is easy to install and firmly connected.

• Hot Melt Connection: Some PE plug-in tube caps can also be connected to the pipes through hot melt to further enhance the firmness of the connection.

2. Application scenarios

1. Building water supply system

• Indoor water supply system: used to close the ends of water supply pipes in homes, commercial buildings, etc. to prevent water leakage.

• Hot water supply system: suitable for solar water heating systems, centralized heating systems, etc., and can withstand high water temperatures.

2. Municipal Engineering

• Urban water supply pipeline network: As an important part of the urban water supply network, it is used to close the ends of the pipeline to prevent water leakage.

• Rainwater drainage system: used to seal the ends of the stormwater drainage pipeline to ensure smooth discharge of rainwater.

3. Agricultural irrigation system

• Irrigation Pipe System: Used to close the ends of the irrigation pipe to prevent water leakage and improve irrigation efficiency.

3. Common specifications

Common specifications of PE plug-in tube caps include but are not limited to the following:

• Nominal diameter: DN20, DN25, DN32, DN40, DN50, DN63, DN75, DN90, DN110, etc.

• Wall thickness: Common wall thicknesses include 2.0mm, 2.5mm, 3.0mm, etc.

4. Advantages

• Affordable: PE plug-in caps are relatively low in price and cost-effective.

• Easy to install: the plug-in connection is simple and the installation is fast.

• Low maintenance cost: The material is corrosion-resistant, has a long service life and is low maintenance cost.

• Easy to operate: good sealing performance, can effectively prevent water flow or gas leakage.